Newstar AVR 1500 Watts Servo Motor LCD Display Full Range NDVIS-1500/G3

This automatic voltage regulator consists of contact auto voltage regulator, servo motor, automatic control circuit and etc. When the voltage fluctuates or the load varies, automatic sampling control circuit will send signal to drive the servo motor which can adjust the position of carbon brush of auto voltage regulator, then the output voltage will be adjusted to rated value and get a steady state.

Compared with other voltage stabilizers, it has the advantage of great variety, complete specification, nice appearance and obvious features of high efficiency, no wave distortion, reliable performance, working continually for long time. Moreover, it is provided with short time delay and over voltage protection, the long time delay and under voltage protection also can be set according to user requirement. This product is an ideal stabilized voltage supply, widely used in any locations requiring electricity and ensures your power device can run normally.

SPECIFICATION:
Control System: D.C. Servo Motor
Frequency: 60Hz
Output Voltage: Constantly, within ±3%
Response Time: Within 1 second against 10% input voltage deviation
Waveform: No Distortion
Ambient Temperature: -5°C – 40°C
Ambient Humidity: Less than 90% (relative humidity)
Power Factor: 100%
Insulation: 100 megohms / 500VDC
Dielectric Strength: 1000V for 1 Min

NDVIS-1500/G3
Input Voltage: 220V±20%
Frequency: 60Hz
Output Voltage: (2) 220V±3%; (1) 110V±6%
Frequency: 60Hz
Power: 1500 Watts

Make sure that the total load power does not exceed the listed maximum output power of the regulator
Volt-Ampere (Max): 1.5KVA
Wattage (Max): 1500W
Installation Cable (Copper): 0.75mm2

Product Dimension:
(LxWxH)
15cm x 26cm x 16.4cm
Weight: 5.3 kg

What’s in the box:
1 x Automatic Voltage Regulator
1 x Guarantee Certificate and User’s Manual

Dimensions:
Package: (LxWxH) cm
35cm x 19.5cm x 22cm

Weight: kg
5.75

Warranty: 1 year