HomeSafe Emergency Auto Dialer with Two-Way Communication and Wireless Remote Control (White) H-T018R

HomeSafe Panic/Emergency/SOS Auto Dialer with Two-Way Communication is designed to inform you via telephone of emergencies happening in your place. It dials your number and inform you that something has happened and does not work as a substitute for a telephone. It gives off alarm and makes you alert of emergencies in your place.

Auto dialer system will automatically dial your number when PANIC button is pressed or if triggered by add-on sensors

The auto dialer is designed to automatically dial the number stored inside the system when panic button is pressed on the unit or on the wireless panic remote. This auto dialer can also attach additional sensors to expand the system. If motion sensor is attached, the auto dialer will be activated when motion is detected. This is a great way to get informed when something is happening in your house.

Room audio monitor, broadcasting and communication via telephone

The auto dialer has a built-in speaker and mic which allow two-way communication. Just by using your phone, you can listen to what is happening in the room (where the auto dialer is located) or broadcast your message and the receiver can reply. (Take note though that you can’t see it because the auto dialer doesn’t have an attached camera.)

RE-SET the system via telephone

The RE-SET is a function that turns the alarm that was activated off and resetting the system back to its previous mode before the alarm was activated. Just call the auto dialer and press the corresponding code in order for the desired function to work.

Built-in flash memory to protect system data for power failure

This function protects the system’s data when power failure occurs. This way, you don’t have to reprogram the system each time the device runs out of power.

Built-in 105dB alarm (with programmable alarm on/off)

This auto dialer system has a built-in alarm. Alarm can be turned on or off. The alarm can be amplified using a siren.

RF panic remote for PANIC and RE-SET

Remote control can be used to arm or disarm the system. The PANIC button will immediately sound the alarm and activate the auto dialer while the RE-SET button is used to turn it off. The remote control must be connected to the system first in order for the system to respond to the signal of the remote.

Expandable with other HomeSafe accessories

The system can be expanded with other HomeSafe accessories. You can increase your securities with just one auto dialer system. You can connect it with other HomeSafe alarms, remote controls, motion sensors, etc. Once other accessories are connected, the auto dialer will be able to receive their signals and respond to them. This auto dialer can have up to 8 additional HomeSafe accessories.

HomeSafe optional compatible accessories: Water Overflow Alarm (H-760A), Magnetic Sensor Pack (HS-01), Wireless Motion Detector Sensor (H-615PR), Wireless Outdoor Motion Detector Sensor (H-616PR), Wireless Slim Door/Window Sensor (H-218WR), Wireless Remote Control (H-200R), Wireless Door/Window Sensor with Alarm (H-600WR), Wired Outdoor Siren (H-515SK/E)

What’s in the box:
1 x Auto Dialer Alarm System, 1 x Wireless Panic Remote, 1 x Antenna for Auto Dialer, 1 x Strap for Remote Control, 1 x DC Adaptor ,3 x Button Cell Batteries(for Remote), 1 x 2C Telephone Cord (2 meters), 1 x Owner’s Manual, 2 x HomeSafe Warning Stickers, 2 x Screws and Tox