HomeSafe Wireless Security/Safety Alarm System w/ Auto Dialer and Wireless Motion Detector Sensor HT-055RP5

HomeSafe Wireless Security Auto Dialer Alarm System + Wireless Motion Sensor is designed to inform you via telephone of threats that are happening in your place. It gives off alarm and makes you alert of the possible threat lurking in your place. It includes a wireless motion detector sensor which is a separated unit that can be connected to the auto dialer. Awareness is important when it comes to safety. Keep your place safe and secured from possible dangers.

Auto dialer system will automatically dial your number when something happens
The auto dialer is designed to automatically dial the number stored inside the system. It is activated when it receives a signal from other wireless sensor connected to the system. This is a great way to get informed when something is happening in your house.

9 configurable zones to easily locate triggered area
This system allows you to sort your sensors into 9 zones, so that it will be easier for you to know which sensor was triggered.

From Zone 1 to Zone 7, each zone can separately learn one wireless sensor ID code. They can trigger the system while in arm mode.

Zone 8S can learn up to 8 wireless sensor ID code. Unlike zone 1 to 7, the 8 sensors are grouped into Zone 8S. They can also trigger the system while in arm mode

Zone 24H (24 hrs standby) can learn up to 8 wireless sensor ID code. Just like Zone 8S, the sensors are also grouped into one. The difference is that the sensors in this zone will trigger the system regardless of it’s mode – arm or disarm mode.

Note: Zone 1 to zone 7 and zone 8S will only trigger the system when in arm mode while zone 24H will trigger in both arm and disarm mode.

Room audio monitor via telephone
You can monitor what is happening in the room where the auto dialer is just by using your phone. You can call the auto dialer and listen to what is happening around it. (Take note though that you can’t see it because the auto dialer doesn’t have an attached camera.)

Remote ARM or DISARM via telephone function
You can turn the system on (arm) or off (disarm) just by using your phone. Just call the auto dialer and press the corresponding code in order for the desired function to work. The codes are included in the manual.

Programmable security code, entry delay timing
The system has a security code so that only you and those who know the code can program the system. The entry delay timing is a function that enables the system to activate after a few seconds (depending on the time set) after it has detected motion or received a signal from other sensors. With this function, the system will not activate immediately.

Records activity for alarm mode
This function enables the system to record which alarm zone was triggered, and the time when the alarm was activated. Only 5 most recent activities will be recorded as old records will be replaced by new ones.

Built-in flash memory to protect system data for power failure

This function protects the system’s data when power failure occurs. This way, you don’t have to reprogram the system each time the device runs out of power.

Home mode function
The home mode function replaces the sound of the alarm with the sound of a door chime. Instead of hearing the alarm when motion is detected, a “Ding Dong” sound will replace it.

Built-in 105dB alarm (with programmable alarm on/off)
This auto dialer system has a built-in alarm. Alarm can be turned on or off. The alarm can be amplified using a siren.

Wireless Motion Sensor for detecting motion
The Wireless Motion Sensor is separated from the Auto Dialer Unit. The sensor is designed to send wireless radio signal when motion is detected to the auto dialer unit which will trigger the system. The motion detection range of the motion sensor is up to 8 meters and 110°. Its wireless transmission distance is about 40-70 meters.

Radio linked remote control for ARM/DISARM/PANIC
Remote control can be used to arm or disarm the system. The remote control must be connected to the system first in order for the system to respond to the signal of the remote. The panic button enables the auto dialer to immediately activate.

Expandable with other HomeSafe accessories
The system can be expanded with other HomeSafe accessories. You can increase your securities with just one auto dialer system. You can connect it with other HomeSafe alarms, remote controls, motion detectors, etc. Once other accessories are connected, the auto dialer will be able to receive their signals and respond to them.

HomeSafe optional compatible accessories: Water Overflow Alarm (H-760A), Magnetic Sensor Pack (HS-01), Wireless Water Overflow Sensor with Alarm (H-660), Wireless Motion Detector Sensor (H-615PR), Wireless Outdoor Motion Detector Sensor (H-616PR), Garage Door Open Detector Sensor (H-625T), Wireless Slim Door/Window Sensor (H-218WR), Wireless Remote Control (H-500R and H-200R), Wireless Door/Window Sensor with Alarm (H-600WR), Wireless AC Socket (H-422R), Wireless Lampholder (H-423R), Wired Outdoor Siren (H-515SK/E)

What’s in the box: 
1 Auto Dialer Alarm
1 Wireless Motion Sensor
1 Radio Linked remote contro
1 AC Adapto
1 12V alkaline battery (for remote control)
1 bracket kit
1 2C Telephone Cord (2 meters)
1 2C Telephone Splitte
1 Owner’s Manual
4 Warning Stickers
4 pcs of Screw and Tox

Package: (LxWxH) cm
20.1 x 10.5 x 29.5

Weight: kg
0.6